Item shown may not be actual product.
Product and price information are subject to change without notice.

Discontinued

Car-O-Liner Deluxe 3 Package

Item Number: CARCOL3EX Supplier: CAR-O-LINER COMPANY

Description

Deluxe 3 Package - Bench, Measuring System, and Anchoring/Fixture Kits

Car-O-Liner offers collision repair equipment that is high-quality, easy to use, highly productive, and features advanced technologies and ergonomic designs. With Car-O-Liner equipment in your shop, your customers - the vehicle owners and insurance companies - will experience safety and complete satisfaction from your work.

Car-O-Liner has worked with American Honda to create three levels of equipment packages that contain everything you need to reduce cycle times and increase profits. All three packages start with the same Bench and Measuring Components that make up the Basic 1 Package. From there, the package is enhanced to include EVO 1 & 2 Anchoring Kits to create Intermediate Package 2, and further enhanced to include EVO 3 Fixture Kits and truck clamping for the Deluxe Package 3.

NOTE: A computer system is required and must be purchased separately.

Features

DELUXE 3 PACKAGE COMPONENTS:

Package Bench Components
BenchRack systems are designed to hold and lift virtually any type of unibody or full-frame vehicle, from small carts to light trucks, vans, and SUVs so you can repair each vehicle that enters your shop. BenchRack combines drive-on convenience with a hydraulic lifts, and removable ramps. Add to this the tilt feature, making loading easier when approach space is limited, and you have the most versatile repair bench on the market.

Frame Alignment Bench System

Machine-milled platform surface for precision repairs
Powerful 10-ton draw aligner pulls from any angle, 360° around the vehicle
Removable ramps allow better access to the vehicle
Flexible installation; drive on with ramps or flush inground

Package Measuring Components
The Car-O-Tronic Vision X3 electronic computerized measuring system is the most powerful system available. The sensor equipped Measuring Slide includes a built-in versatile remote control and protective rubber "bumper zones" to deliver real-time data three times per second to the advanced and easy-to-use software. Photo-based, and backed by the world's most comprehensive vehicle database, users can accurately and quickly target measuring points.

The measuring slide communicates wirelessly with the Car-O-Tronic Vision X3 software. Through sensors in each joint and a measuring head underneath, it delivers real-time measuring data three times per second. The built-in versatile remote control lets the operator manage the entire measuring process without having to be at the computer.

Electronic Measuring System

Database for over 15,000 cars, trucks, and SUVs
Precise, 3D measurements for all under- and upper-body locations
Photo-based images offer easy point identification
Wireless, no targets, sensors, or lasers
Not affected by noise, wind, or sun
Compatible with nearly any frame system
Point-to-point measuring with dimensional data
Worldwide VIN decoding
Suspension diagnosis

EVO 1, 2, & 3 - Anchoring/Fixture Kits
The modular EVO system contains a minimum number of components that are adaptable to be assembled in a multitude of configurations to address your repair needs. Featuring vice-like clamps for no slips, these universal kits work for every vehicle year, make, and model so you never have to pay fixture costs. Components can be used alone or combined with one another to handle every anchoring, holding, and fixturing situation so that you can repair each vehicle that enters your shop.

Anchoring, Holding, and Fixturing System

EVO 1 is made for basic anchoring. The basic system for anchoring, holding, and side support during the repair. The kit includes three towers, multi-purpose clamp, track plate, adapter with bushings, chain holder, downpull and torque bar for heavy operations.
EVO 2 provides additional equipment for anchoring, holding, and side support. It includes two extra towers and track plates, special tools for rear axle bracket, torque bar extensions and adjustable holders. It is the perfect addition to EVO 1, and when supported by the Car-O-Tronic Vision X3 electronic measuring system, the equipment works on most vehicle models on the market.
EVO 3 is made for building a fixture to hold a new body parts in place when welding and bonding. When combined with EVO 1 and 2, and supported by the Car-O-Tronic Vision X3 electronic measuring system, the equipment works on all vehicle models on the market.

Equipment Storage and Inventory Control System
Car-O-Liners WorkShop Solutions provide an organized inventory control panel, and allows you to store and hang various accessories and tools. Parts silhouettes ensure tools are returned to the proper location.

Truck Clamping and Support System
The Car-O-Liner Truck Clamping and Support System allows you to anchor and repair every compact truck, pickup, van, and sport utility vehicle - with holding power that far exceeds pulling requirements. It's an ideal companion to the BenchRack and Mark 6 systems and has set new industry standards for full-frame repairs.

Fast setup and tear down time
User-friendly and easy to learn
Reduces pulling and measuring time - increasing your profits
Versatile - can be used on virtually all full-frame cars and trucks
Easy access under the vehicle
Less change of frame damage due to improper hook-ups - avoids costly rework
Isolates frame from suspension for easier diagnosis
Clamp holds tightly to the spring shackle without removing the spring. Saves time and expense.
Clamps rotate to accommodate new angled frame designs.
Clamps easily adapt to hard to reach areas and obstructions.
Vise-like clamps holds all frames effortlessly and precisely without collapsing the rails.

Includes

Frame Alignment Bench System Components

CAR34640 (1) B83 BR5500 Frame and Tilt Lift
CAR31934 (1) B323 Ramp Kit for BR5500
CAR30668 (4) B213 Distance 50 mm
CAR34014 (1) Pillar Jack Kit
CAR30774 (2) Hydraulic Oil
CAR30346 (2) D16 Draw Aligner
CAR205 (2) Ram Adapter
CAR701 (2) Pump, Hose, and Cylinder Set - 10 Ton
CAR30948 (1) B106 / B39BR Bench Parts
CAR930 (4) Double Grab Hook
CAR931 (4) 3/8" x 8' Chain with Grab Hook
CAR31040 (2) Cable Guard
CAR90049 (1) Power Unit for Bench Rack

Electronic Measuring System Components

(1) Car-O-Data CD
CAR34572 (1) M90 Vision Measuring Slide
CAR39635 (1) Measuring Bridge, 5 m
CAR46695 (1) Vision2 X3 Software
CAR36481 (1) M81 Vision Cabinet Flat Pack
CAR31259 (1) M62 COT Measuring Parts
CAR33493 (1) M741 Battery Charger

Anchoring, Holding, and Fixturing System Components

CAR35413 (1) EVO 1 - Basic System
CAR35419 (1) EVO 2 - Extension Ssytem
CAR35797 (1) EVO 1 Tool Board Set WSE211
CAR35800 (1) EVO 2 Tool Board Set WSE214
CAR35804 (1) EVO 3-1 Tool Board
CAR41077 (1) EVO 3-2 Tool Board
CAR36283 (1) Tool Board Set B73 1+2 WSB230 (for Trucks)
CAR35786 (1) Wall Section 900 WSB900
CAR35420 (1) EVO 1-3 Reduced
CAR43399 (1) Ramp Blue - 1,800 mm
CAR35820 (1) Car-O-Liner Sign

Truck Clamping and Support System

CAR35891 (1) B730 Truck Clamping
CAR35892 (1) B340BR Bench Mounting Kit

Warranty

Two years

Equipment Amount:
(Minimum amount is $2000)

Monthly Payment Schedule
Equipment Amount:		Rate for this amount: %
End of Term Option: $ 1.00

24 months	36 months	48 months	60 months
%	%	%	%

Note: Rate Factors, Rates and Payment Amounts may not be available to new businesses and are subject to credit approval.

This quoter is only a tool to help approximate a monthly lease payment and is non-binding. All financing, rates, and terms subject to satisfactory credit review and approval at the discretion of IDSC Holdings, Inc. & Snap-on Credit. The amount to finance may change based on actual costs of equipment and fees, such as installation, taxes, and UCC filing fees, which vary by state and may be extra. Rates used to calculate payments, taxes, and costs of financing, such as costs to file UCC financing statements, vary by state, and any such items may change without notice. First & last payments typically due at lease signing. Standard lease terms and conditions apply. In the event of default under the lease, the terms of the lease will apply and finance charges and late charges of up to 12 % of each lease payment may be due if allowed by law.

Use the following formula to figure your Return of Investment (ROI) for A/C Equipment

Revenues
Number of times equipment will be used per month
Dollars charged per use $

Expenses
Number of labor hours
The technician's wage per hour $
Cost of supplies consumed $
Other costs $
Monthly cost of equipment (Lease cost or purchase price divided by 36) * $

Gross monthly profit
Monthly net profit

* Based upon a 3 year period

Use the following formula to figure your Return of Investment (ROI) for Four Wheel Alignment Equipment

Number of four wheel alignment jobs per month:
Amount of revenue from a four wheel alignment job $
Number of two wheel alignment jobs per month
Amount of revenue from a two wheel alignment job $
Average amount of gross parts profit per job $
Monthly lease cost or loan payment for equipment $
Cost of the Equipment $

Monthly gross profit from equipment purchase
Annual gross profit from equipment
Return on equipment investment ratio:*



*The higher the number, the more profitable the equipment. An answer of 1 means that you'll get a 100% return on the equipment over five years. A 100% return over the life of the equipment is the minimum return you should expect on your investment. A return 2 (200%) to 5 (500%) should be your target. An answer less then 1 (e.g., .50) means that you need to sell more jobs or increase the price of the service in order to generate an adequte return on the equipment investment.